Full Rigid frame for Ironhead's
CNC bent tubing, TIG weld construction, CNC laser and bent tabs.
Rear of frame is roughly 4” longer than stock with 2” of drop.
This frame has a stock neck height and has 32 degrees of rake for a perfect stance with a stock length front end and 21" wheel.
Accepts 1” front fork stem.
Disc brake only rear for 3/4” axle.
Designed for early style Sportster kickstand. Ironhead style 1952-81.
You can choose to order with standard Sportster gas tank mounts or Frisco tank mounts. The Standard Sportster tank mounts are the 1952-77 Ironhead style mounts most commonly found on custom tanks. The Frisco style mounts are for Frisco style Sportster tank mounts, Frisco Wassell style tanks are slightly shorter and the tabs will require the holes to be lengthened.
You can also order with the oil tank (010404) mounted. This means the lower oil tank tab is welded onto the frame and the oil tank is installed with all hardware.
Requires 1957-81 (16210-52) front motor plates and 1967-81 (16203-67) rear cast motor mount. If you have a 1982-85 Model, you will need to change to these motor mounts.
All pre 1976 engines with the right side shifter, will need custom controls made.
MSO included. This is required when changing frames in certain states.
These are built to order. Please allow 3-4 weeks before shipping.
Free Shipping Does Not Apply to Frames
Obtaining a title for a custom vehicle varies from state to state and you should check with your local laws before purchasing. Gasbox is not responsible for your ability to obtain a title in your jurisdiction.
